Product Details
The Dakine Spike Stomp Pads features translucent molded spikes for maximum traction. It can be cut in sections and reconfigured to suit your needs. Only finest peel and stick adhesives is supplied to ensure easy installation. Below is simple and easy procedure for optimum bonding: 1. Board and stomp should be at room temperature, 70 F [ 21 C ] 2. Clean surface with rubbing alcohol. Surface must remain clean, smooth and dry. Do not touch. 3. Use a blow dryer on high to heat up the prepared board surface as well as the adhesive on the traction device. 4. Immediately after heating, place the stomp and press firmly. Stand on the stomp without twisting, the more weight the better. 5. Allow the adhesive to cure at room temperature for 24 hours.
Features
4 per pack
Dimensions: 3"each
C-Foam - Specifically Formulated Rubbery Foam Blend that's Lightweight, Heavy duty, and Grabs Like a Crab
4EVA Glue - When properly applied, these things should stay on until the day after forever.
Gripples - Signature Texture: Tiny Little Gripping Nipples for Maximum Grippy-ness.
Foam Squishes into the Tread on your Boot Creating a Solid Bond
UPC:
