Dakine Circle Mat Stomp Pads
The Dakine Circle Mat Stomp Pads are very easy to fit onto the board and requires a simple procedure to be followed for installation. Only the finest peel and stick adhesives is used on the mat to ensure a secure attachment. A simple procedure for optimum bonding is described below: 1. Board and stomp should be at room temperature, 70 F [ 21 C ] 2. Clean surface with rubbing alcohol. Surface must remain clean, smooth and dry. Do not touch. 3. Use a blow dryer on high to heat up the prepared board surface as well as the adhesive on the traction device. 4. Immediately after heating, place the stomp and press firmly. Stand on the stomp without twisting, the more weight the better. 5. Allow the adhesive to cure at room temperature for 24 hours.
- Female Male
- Die cut vinyl
- Tech Specs
- Size: 4" x 4" [ 100mm x 100mm ] Weight: 6 oz. [ 17g ]